|
|
|
motor
|
- 9hp Briggs and Stratton from a cement mixer
|
|
|
features: one cylinder, cast iron bore, 23 cubic inch displacement, horizontal shaft, 6:1 gear reduction, Autolite spark plug, custom muffler, and foot throttle
|
|
clutch
|
- Two V belts that connect the motor pulley to the transmission pulley are tensioned and released with an idler that is attached to a foot pedal.
|
|
|
features: three springs to tension idler and 15:8 gear reduction
|
|
transmission
|
- 5 speed from a Suzuki samurai
|
|
|
features: front pillow block bearing with SRP bushing, vertical adjustment to tighten V belts, golf ball shifter knob, 12" ground clearance
|
|
rear end
|
- from a studebaker, narrowed by removing sections of axle between wheels and differential 7" ground clearance
|
|
front end
|
- possibly from a model A, with center pivot and 7 1/2" ground clearance
|
|
wheels
|
- front: 15" rims rear: 14" rims with doubled snow chains
|
|
steering box
|
- ford
|
|
brakes
|
- none
|
|
dimensions
|
- wheel base 66", tread width 51", overall length 112"
|
